User Manual

SVT-610HLF Bass Guitar Cabinet
5
INSIDE INSIDE
-db
LEVEL CONTROL
4
5
6
7
8
8
9
10
11
12
16
0
1
2
3
Designed in USA | Made in China
26580 Agoura Rd., Calabasas, CA 91302 USA
WARNING: THIS SPEAKER IS CAPABLE OF
PRODUCING SOUND PRESSURE LEVELS (SPL)
WHICH CAN CAUSE HEARING IMPAIRMENTS OR
LOSS. EAR PROTECTION IS RECOMMENDED
IMPEDANCE: 4 OHMS
POWER: 600W RMS/1200 PEAK
INPUTS
1+ = POS(+) / 1- = NEG(-)
SVT - 610HLF
SERIAL NUMBER
-db
LEVEL CONTROL
4
5
6
7
8
8
9
10
11
12
16
0
1
2
3
Designed in USA | Made in China
26580 Agoura Rd., Calabasas, CA 91302 USA
WARNING: THIS SPEAKER IS CAPABLE OF
PRODUCING SOUND PRESSURE LEVELS (SPL)
WHICH CAN CAUSE HEARING IMPAIRMENTS OR
LOSS. EAR PROTECTION IS RECOMMENDED
IMPEDANCE: 4 OHMS
POWER: 600W RMS/1200 PEAK
INPUTS
1+ = POS(+) / 1- = NEG(-)
SVT - 610HLF
SERIAL NUMBER
-db
LEVEL CONTROL
4
5
6
7
8
8
9
10
11
12
16
0
1
2
3
Designed in USA | Made in China
26580 Agoura Rd., Calabasas, CA 91302 USA
WARNING: THIS SPEAKER IS CAPABLE OF
PRODUCING SOUND PRESSURE LEVELS (SPL)
WHICH CAN CAUSE HEARING IMPAIRMENTS OR
LOSS. EAR PROTECTION IS RECOMMENDED
IMPEDANCE: 4 OHMS
POWER: 600W RMS/1200 PEAK
INPUTS
1+ = POS(+) / 1- = NEG(-)
SVT - 610HLF
SERIAL NUMBER
-db
LEVEL CONTROL
4
5
6
7
8
8
9
10
11
12
16
0
1
2
3
Designed in USA | Made in China
26580 Agoura Rd., Calabasas, CA 91302 USA
WARNING: THIS SPEAKER IS CAPABLE OF
PRODUCING SOUND PRESSURE LEVELS (SPL)
WHICH CAN CAUSE HEARING IMPAIRMENTS OR
LOSS. EAR PROTECTION IS RECOMMENDED
IMPEDANCE: 4 OHMS
POWER: 600W RMS/1200 PEAK
INPUTS
1+ = POS(+) / 1- = NEG(-)
SVT - 610HLF
SERIAL NUMBER
The alternate example shown above is not as common, but is great for daisy-chaining
multiple cabinets. You may connect a speaker cable with 1/4" or Speakon ends from one
speaker output of the amplier to the speaker input of the Ampeg SVT-610HLF cabinet.
An additional cabinet may be connected by attaching another speaker cable from an open
jack (thru) to the input jack of the next cabinet. Multiple cabinets may be daisy-chained this
way.
WARNING: Always use good quality (non-shielded) speaker cables. Never use
(shielded) instrument cables to connect speakers to an amplier. Also, do not use
both cable routes listed in the alternate example above. Use one route or the other, but
never both simultaneously!