User Manual

Micro-VR Bass Guitar Amplifier
8
Declaration Of Conformity
Manufacturer: LOUD Technologies Inc.
16220 Wood-Red Rd. NE
Woodinville, WA 98072, USA
Product Name: Ampeg Micro-VR
Product Type: Audio Amplifier
Complies with Standards:
LVD: 92/31/EEC, 93/68/EEC, & 73/23/EWG
Safety: EN60065
EMC: EN55013, EN55020, EN55022, EN55103, EN61000-3-2,
& EN61000-3-3
The official Declaration of Conformity for this product is kept on file at:
LOUD Technologies Inc., 16220 Wood-Red Road NE, Woodinville, WA 98072 • Tel: [phone]
MICRO-VR TECHNICAL SPECIFICATIONS
Output Power Rating 150 watts rms @ 8 ohms, 5% THD
200 watts rms @ 4 ohms, 5% THD
Signal to Noise Ratio 72 dB (20 Hz–20 kHz, unweighted)
Maximum Gain 62 dB, tone controls centered
Tone Controls Bass: +14/–12 dB @ 40 Hz
Midrange: +5/–13 dB @ 500 Hz
Treble: +19/–25 dB @ 8 kHz
Power Requirements 100–120 VAC, 50–60 Hz, 150 W
220–240 VAC, 50–60 Hz, 150 W
Size (H x W x D) 7.5 in/190 mm (with feet) x 12 in/305 mm
x 10 in/254 mm
Weight 9.9 lb/4.5 kg
The Micro-VR is covered with a durable fabric-backed vinyl material. Clean with a dry lint-free cloth.
Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish.
Ampeg continually develops new products and improves upon existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
“Ampeg” is a registered trademark of LOUD Technologies Inc. All other brand names mentioned are trademarks
or registered trademarks of their respective holders and are hereby acknowledged.
www.ampeg.com
@2008 LOUD Technologies Inc.
16220 Wood-Red Road NE • Woodinville, WA 98072
Part No. 0031570 Rev. B 10/08