User Manual

9
Liquifier Analog Chorus
Technical Specications
Signal-to-Noise Ratio 82 dB (Eect Level 100% Wet)
94 dB (Eect Level 100% Dry)
Maximum Gain +0 dB (Unity)
Maximum Input Level 1.1V RMS (3.0V peak-peak) before clipping
(1.00% distortion), 100 Hz input
Frequency Response 100 Hz – 5 kHz, ±3.0 dB (100% Wet)
(Input Level 1.00 V peak-peak) 20 Hz – 20 kHz, ±0.5 dB (100% Dry)
Impedances 1 M (Input)
200 (Output)
Power Requirements Internal: 9V Battery
External: 9V DC, ≥60 mA, center negative
Maximum Current Draw: 56 mA at 9V DC
Size (H x W x D) 2.2 in x 2.6 in x 4.5 in
56 mm x 66 mm x 114 mm
Weight 0.6 lb / 0.3 kg (approximately)
The Liquifier Analog Chorus is housed in a corrosion resistant, die-cast zinc chassis, so be sure to clean it with
a dry, lint-free cloth. Never spray cleaning agents on the Liquifier Analog Chorus. Avoid abrasive cleansers which
would damage the finish.
Ampeg continually develops new products and improves upon existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
Warranty and Support
Visit WWW.AMPEG.COM to...
(1) ...identify WARRANTY coverage provided in your local market. Please keep your
sales receipt in a safe place.
(2) ...REGISTER your product.
(3) ...CONTACT Technical Support, or call 818-575-3600.
© 2019 Yamaha Guitar Group, Inc. All rights reserved.
Ampeg and the Ampeg logo are trademarks or registered trademarks of Yamaha Guitar Group, Inc. in the U.S. and/or
other jurisdictions.
www.ampeg.com
Yamaha Guitar Group, Inc.
26580 Agoura Road, Calabasas, CA 91302-1921 USA
Rev. A