User's Manual

- 56 -
WLAN Broadband Router
User Manual
QoS Rule Setting
Address Type
Select the type of rule. IP (layer3) or MAC (layer2).
Local IP Address
When you select IP type, you should fill out the IP address range of local
NIC or device. Such as “192.168.1.10 – 192.168.1.20”.
MAC Address
When you select MAC type, you should fill out the MAC address of local
NIC or device. Such as “001122334455”.
Mode
Select the mode from pull-down menu. There are “Guaranteed minimum
bandwidth” and “Restricted maximum bandwidth”.
Uplink Bandwidth
Fill out a value (Kbps) to limit uplink bandwidth.
Downlink Bandwidth
Fill out a value (Kbps) to limit downlink bandwidth.
Comment
Type words or string to make a comment about the rule that you created.
Apply Changes
Click the Apply Changes button to commit changes.
Reset
Click the Reset button to abort change and recover the previous
configuration setting.
Delete Selected
Select one rule under Current QoS Rules Table, click Delete Selected
button to delete the rule that you selected.
Delete All
Click Delete All button to delete all rules under Current QoS Rules Table.
Reset
Click the Reset button to abort change and recover the previous
configuration setting.