User's Manual

- 51 -
WLAN Broadband Router
User Manual
4.3.5.4 Port Forwarding
Entries in this table allow you to automatically redirect common network services to a specific machine
behind the NAT firewall. These settings are only necessary if you wish to host some sort of server like
a web server or mail server on the private local network behind your Gateway's NAT firewall.
Item Description
Enable Port Forwarding Click to enable the Port Forwarding security function.
Port Range/ Protocol/
Comment
The Port Range for data transmission.
The Protocol can be TCP, UDP or Both.
Comment let you know about whys to allow data packets forward to the
IP address and port number.
Apply Changes
Click the Apply Changes button to register the IP address and port
number to Port forwarding list.
Reset
Click the Reset button to abort change and recover the previous
configuration setting.
Delete Selected
Click to delete the selected IP address and port number that will be
removed from the port-forwarding list.
Delete All Click to delete all the registered entries from the port-forwarding list.
Reset
Click the Reset button to abort change and recover the previous
configuration setting.