User's Manual

- 38 -
WLAN Broadband Router
User Manual
4.3.4.2 WAN Interface Setup
This page is used to configure the parameters for wide area network that connects to the WAN port of
your WLAN Broadband Router. Here you may change the access method to Static IP, DHCP, PPPoE
or PPTP by click the item value of WAN Access Type.
4.3.4.2.1 Static IP
Item Description
Static IP
Click to select Static IP support on WAN interface.
There are some fields: IP address, subnet mask and
default gateway settings, need to be filled.
IP Address
If you select the Static IP support on WAN interface, fill
in the IP address for it.
Subnet Mask
If you select the Static IP support on WAN interface, fill
in the subnet mask for it.