User's Manual

- 33 -
WLAN Broadband Router
User Manual
4.3.3.7 WPS
This page allows you to change the setting for WPS (Wi-Fi Protected Setup). Using this feature could
let your wireless client synchronize automatically its setting and connect to the Access Point in a
minute without any hassle.
Item Description
Disable WPS Click on to disable the Wi-Fi Protected Setup function.
WPS Status Show WPS status is Configured or UnConfigured.
Rest to UnConfigured Click this button to back to UnConfigured status.
Self-PIN Number
Fill in the PIN Number of AP to register the wireless distribution system
access capability.
Push Button Configuration
The Start PBC button provides tool to scan the wireless network. If any
Access Point or IBSS is found, you could connect it automatically when
client join PBC mode.
Apply Changes
Click the Apply Changes button to complete the new configuration
setting.
Reset
Click the Reset button to abort change and recover the previous
configuration setting.
Client PIN Number Fill in the Client PIN Number from your Client sites.