User's Manual

- 29 -
WLAN Broadband Router
User Manual
4.3.3.4 Access Control
If you enable wireless access control, only those clients whose wireless MAC addresses are in the
access control list will be able to connect to your Access Point. When this option is enabled, no
wireless clients will be able to connect if the list contains no entries.
Item Description
Click the Disabled, Allow Listed or Deny Listed of drop down menu choose
Wireless Access
Control Mode
wireless access control mode. This is a security control function; only those
clients registered in the access control list can link to this WLAN
Broadband Router.
MAC Address
Fill in the MAC address of client to register this WLAN Broadband Router
access capability.
Comment Fill in the comment tag for the registered client.
Apply Changes Click the Apply Changes button to complete the new configuration setting.
Reset
Click the Reset button to abort change and recover the previous
configuration setting.
Current Access Control
List
It shows the registered clients that are allowed to link to this WLAN
Broadband Router.
Delete Selected
Click to delete the selected clients that will be access right removed from
this WLAN Broadband Router.
Delete All Click to delete all the registered clients from the access allowed list.
Reset
Click the Reset button to abort change and recover the previous
configuration setting.