User's Manual

- 24 -
WLAN Broadband Router
User Manual
Aggregation
Click to enable or disable the Aggregation function.
Short GI
Click to enable or disable the short Guard Intervals function.
WLAN Partition
Click to enable or disable the WLAN Partition function.
RF Output Power
To adjust transmission power level.
Apply Changes
Click the Apply Changes button to complete the new configuration setting.
Reset
Click the Reset button to abort change and recover the previous configuration
setting.
4.3.3.3 Security
This page allows you setup the wireless security. Turn on WEP, WPA; WPA2 by using encryption keys
could prevent any unauthorized access to your wireless network.
4.3.3.3.1 Disable
Item
Description
Select SSID
Select the SSID from multiple APs.
Disable
Select the “Disable” option to disable wireless encryption.
Use 802.1x Authentication
While Encryption is selected to be WEP. Click the check box to enable
IEEE 802.1x authentication function.
Apply Changes
Click the Apply Changes button to complete the new configuration
setting.
Reset
Click the Reset button to abort change and recover the previous
configuration setting.