User`s guide

SR600EX

USER’S GUIDE

b. The connection to the Home Network may be down. Use an Ethernet cable and connect directly to

the Pro Smart Repeater. Access http://setup.ampedwireless.com and run through the Smart Setup

Wizard again. After you have successfully reset the Home Network/Hot Spot connection, try

connecting wirelessly again.

I can no longer access the Web Menu or the Pro Smart Repeater no longer responds.

a. Connect to your Pro Smart Repeater and try to access http://setup.ampedwireless.com using your

web browser.

b. If you are advanced in networking troubleshooting, log onto your home router’s web interface. Look

for the DHCP client list and try to find the IP address of your Pro Smart Repeater assigned by your

home router. Once you have it, connect to the Pro Smart Repeater using an Ethernet cable. Open

your web browser and enter the IP address into the address bar.

c. Reset the Pro Smart Repeater back to default settings and try the Smart Setup Wizard again. To reset

the Repeater back to default settings, push the Reset Button (on the back of the PoE Adapter) down

for five to ten (5-10) seconds then let go. After the Pro Smart Repeater has fully reset, use an

Ethernet cable and connect to the Pro Smart Repeater. Login to the Web Menu at

http://setup.ampedwireless.com and run through the Wizard.