User`s guide

SR600EX
USER’S GUIDE
15
Scan for a Wireless Network
Click SCAN to begin searching for available wireless
networks to repeat.
Highlight your network and click Next to continue.
If you fail to find any wireless networks, the Pro Smart
Repeater may be placed too far from the wireless network
that you are trying to repeat. Move your Pro Smart
Repeater closer to the wireless network that you are
trying to repeat and click SCAN again.
The Scan results page will display information regarding
the name of the network (SSID), the wireless channel and
the network details. AP stands for Access Point and is the standard type of wireless network. The results page
will also display whether or not your network has security and what the signal strength is coming from each
specific network detected. Ensure that the network you are repeating has a signal strength of at least 70%. If
it does not, reorient the Pro Smart Repeater or your wireless router to achieve a signal strength of 70% or
greater.