User's Manual
Table Of Contents
- INTRODUCTION
- GETTING STARTED
- SETUP GUIDE
- 5.0GHz WI-FI SETTINGS
- 5.0GHz Wi-Fi Settings: Home Network Settings (5.0GHz)
- 5.0GHz Wi-Fi Settings: Extended Network Settings (5.0GHz)
- 5.0GHz Wi-Fi Settings: Security (5.0GHz)
- 5.0GHz Wi-Fi Settings: Wi-Fi Protected Setup – WPS (5.0GHz)
- 5.0GHz Wi-Fi Settings: User Access (5.0GHz)
- 5.0GHz Wi-Fi Settings: Wireless Coverage Controls (5.0GHz)
- 5.0GHz Wi-Fi Settings: Access Schedule (5.0GHz)
- 5.0GHz Wi-Fi Settings: Advanced Settings (5.0GHz)
- 2.4GHz WI-FI SETTINGS
- 2.4GHz Wi-Fi Settings: Home Network Settings (2.4GHz)
- 2.4GHz Wi-Fi Settings: Extended Network Settings (2.4GHz)
- 2.4GHz Wi-Fi Settings: Wi-Fi Protected Setup – WPS (2.4GHz)
- 2.4GHz Wi-Fi Settings: User Access (2.4GHz)
- 2.4GHz Wi-Fi Settings: Wireless Coverage Controls (2.4GHz)
- 2.4GHz Wi-Fi Settings: Access Schedule (2.4GHz)
- 2.4GHz Wi-Fi Settings: Advanced Settings (2.4GHz)
- USB STORAGE
- NETWORK SETTINGS
- MANAGEMENT FEATURES
- TECHNICAL SPECIFICATIONS
- DEFAULT SETTINGS
- TROUBLESHOOTING AND SUPPORT INFORMATION
SR20000G
USER’S GUIDE
71
To Map the network drive:
a. Open Finder.
b. From the menu on the top of the desktop, select Go.
c. Select Connect To Server from the drop down menu.
d. Enter the address of the network drive: AMPED_REP_USB or shared disk IP address, then click
Connect.
The Dual Band Repeater freezes or I cannot access the web when a USB storage device is connected.
a. Remove the USB storage device from the Dual Band Repeater and reboot it by unplugging the power
adapter. Once rebooted, try inserting the USB storage device again.
b. Make sure your USB storage device is not corrupted and is working properly and try again.
Additional USB Storage troubleshooting tips may be available online at the Amped Wireless Elite Support
Center. Please check the Elite Support Center for the latest updates and features for USB Storage support.