User’s Guide High Power Wireless-N 600mW Gigabit Dual Band Repeater SR20000G
SR20000G USER’S GUIDE CONTENTS INTRODUCTION ..................................................................... 2 GETTING STARTED ................................................................. 3 Package Contents ...................................................................... 3 LED Indicators............................................................................ 4 Back Panel Description .............................................................. 5 SETUP GUIDE .............................
SR20000G USER’S GUIDE INTRODUCTION Thank you for purchasing this Amped Wireless product. At Amped Wireless we strive to provide you with the highest quality products through innovation and advanced technology. We pride ourselves on delivering products that outperform and go beyond your expectations. If you have any questions please feel free to contact us. We’d love to hear from you and thank you for your support! Email: sales@ampedwireless.com Call: 888-573-8830 Web: www.ampedwireless.
SR20000G USER’S GUIDE GETTING STARTED Package Contents Check to make sure you have all the contents within your package: • • • • • • High Power Wireless-N 600mW Gigabit Dual Band Repeater Two Detachable 5dBi High Gain Antennas Power Adapter (100-240v) RJ-45 Ethernet Cable Setup Guide CD: User’s Guide, Installation Video • Stand for Vertical Mounting 3
SR20000G USER’S GUIDE LED Indicators Power: Indicates when the Dual Band Repeater is powered on. The LED will remain on. 5.0GHz Wireless Activity: Blinks rapidly when wireless data traffic is transmitted or received over the 5.0GHz wireless network. 2.4GHz Wireless Activity: Blinks rapidly when wireless data traffic is transmitted or received over the2.4GHz wireless network. Gigabit Wired Ports 1-5: Indicates when a networking device is connected to a wired port on the back of the Dual Band Repeater.
SR20000G USER’S GUIDE Back Panel Description Antenna Connectors (1-2): RJ-SMA antenna connectors. Attach the included high gain dual band antennas to these connectors USB Port: Attach USB storage devices, such as USB flash drives and external hard drives, for file sharing. Reset: Push down once to reboot the Dual Band Repeater. Hold down for 5-10 seconds to reset the Dual Band Repeater back to factory settings. WPS: Hold down for 3 seconds to enable WPS push button configuration.
SR20000G USER’S GUIDE SETUP GUIDE Find a Setup Location The location of where you install the Dual Band Repeater is very important to how it will function. The optimal setup location should be somewhere no more than halfway between your wireless router and your wireless dead zone.
SR20000G USER’S GUIDE Connect your PC to the Dual Band Repeater a) Attach the antennas of the High Power Repeater to the antenna ports labeled 1 and 2 b) Connect the included grey network cable to an available port on your computer c) Attach the power adapter to the Dual Band Repeater’s PWR port and a power outlet Do NOT attempt to connect to the Dual Band Repeater with a wireless connection at this time.
SR20000G USER’S GUIDE Open your Web Browser to Access the Setup Wizard a. b. c. Open your web browser. Type in: http://setup.ampedwireless.com into the web address bar. If the web menu fails to open, type in the following IP address into your web address bar: http://192.168.1.240 a. b. Disconnect your PC from all wireless networks, open your browser and try again. If you continue to have problems accessing the Web Menu, disconnect the cable from your computer to the Repeater.
SR20000G USER’S GUIDE Welcome to the Smart Setup Wizard When the web menu appears, click Next to proceed with the Smart Setup Wizard. The diagram on this page displays: 1) Home/Office Network: The existing network you are trying to repeat. 2) 2.4GHz/5.0GHz Extended Network: The extended network (amplified and rebroadcasted network). The terms above are used throughout the installation process to describe your Home Network and the Extended Network.
SR20000G USER’S GUIDE Scan for a Wireless Network Click SCAN to begin searching for available wireless networks to repeat. The Scan result will list all available 2.4GHz and 5.0GHz wireless networks detected by the Dual Band Repeater – including each network name (SSID), the operating channel, the type of security and the signal strength. If you are extending a dual band router, you will need to select the SSID of your 2.4GHz network and the SSID of your 5.0GHz network.
SR20000G USER’S GUIDE Once you have selected your wireless network(s), click Next to continue. If you are only connecting to one network, simply select that 2.4 or 5.0GHz network and click Next to continue.
SR20000G USER’S GUIDE Connecting to a Secure Network If the wireless network(s) you are trying to repeat has wireless security enabled, you will be prompted to enter a security key. If you are repeating a dual band router, you will need to enter the security key for both the 2.4GHz and 5.0GHz network. If either network does not have security, leave the field blank. After you have entered the security key(s), click Next to continue.
SR20000G USER’S GUIDE Extended Network Settings (SSID and Security) The default SSID of the Dual Band Repeater is “Amped_Rep_2.4GHz” and “Amped_Rep_5.0GHz” To change it, enter a new name in the SSID field. Users connecting wirelessly to the Dual Band Repeater will use this ID to identify your Extended Network. Configure the settings for your Extended Networks here. Depending on the capabilities of your wireless adapter, you may connect to either the 2.4 or 5.0GHz Extended Networks.
SR20000G USER’S GUIDE The default Security Key (WPA/WPA2 Mixed Mode) of your Extended Network(s) is: wireless To change it, enter a new key in the Security Key field. The key must be a minimum of 8 characters. No security key is necessary for computers connecting to the Dual Band Repeater using a wired connection to the LAN ports. Click Next to complete the setup process. The Dual Band Repeater will reboot and apply your settings.
SR20000G USER’S GUIDE Setup Summary Once the Dual Band Repeater has rebooted, it will load the Setup Summary page and provide you with the details of your setup. Congratulations, the Dual Band Repeater is now successfully configured. Your settings are now saved. Print the Setup Summary details and save it for future reference. At this time, you may disconnect from the Dual Band Repeater and start a wireless connection.
SR20000G USER’S GUIDE Wired Port Routing The Smart Setup wizard automatically selects the Home Network (2.4GHz or 5.0GHz) your wired devices will be routed through to connect to the Internet.
SR20000G USER’S GUIDE If the Home/Office Network connection fails try the following… The failed connection page will provide you with information on why the connection failed. Read the instructions carefully and retry your connection. The tips below will help to solve common issues: a. b. c. d. e. f. Check to make sure your Home Network security settings are correct. On the SCAN page, check that your Home Network is showing a signal of 70% or greater.
SR20000G USER’S GUIDE 5.0GHz WI-FI SETTINGS 5.0GHz Wi-Fi Settings: Home Network Settings (5.0GHz) The Home Network Settings (5.0GHz) page allows you to adjust settings for your 5.0GHz Home Network connection. These settings are for adjusting the Dual Band Repeater’s Home Network connection after you have already gone through the Smart Setup Wizard and wish to adjust your current configurations. Home Network SSID (5.0GHz): Manually enter the Identification name of the existing 5.
SR20000G USER’S GUIDE 5.0GHz Wi-Fi Settings: Extended Network Settings (5.0GHz) The Extended Network Settings page allows you to adjust settings for your Extended Network. SSID of Extended Network: The name used to identify your Extended Network. This is the name that appears when a user scans for available Wi-Fi networks. Band: Allows you to setup access under a specific combination of Wi-Fi speed standards. Broadcast SSID: Selecting Disable Broadcast SSID will hide the visibility of the repeater’s SSID.
SR20000G USER’S GUIDE Guest Networks (5.0GHz) Click “Enable” to create a Guest Network. Guest Networks provide a separate wireless network, with unique settings for users to connect to. Band: Restrict the Wi-Fi protocol and speed used for the specific Guest Network. SSID: This is the name of your Guest Network. Data Rate: Restrict access to the Guest Network by setting a lower bandwidth by changing the data rate. Broadcast SSID: Disable to hide your SSID from public view.
SR20000G USER’S GUIDE 5.0GHz Wi-Fi Settings: Security (5.0GHz) Wireless security allows you to change the type of wireless security settings for your 5.0GHz Extended Network, Home Network or Guest Networks. Note: If you adjust the security of your Home Network and it is incorrect, the Dual Band Repeater will no longer have a successful connection to your Home Network. Using the drop down menu, you can select which network you wish to configure and may adjust the security settings below.
SR20000G USER’S GUIDE 5.0GHz Wi-Fi Settings: Wi-Fi Protected Setup – WPS (5.0GHz) WPS is a Wi-Fi feature created to make Wi-Fi setup simple and easy. Some wireless routers and adapters support this feature with varying names (i.e. one touch setup or WPS). You may enable WPS setup here by selecting the type of WPS setup you wish to use.
SR20000G USER’S GUIDE User Access allows you to deny access or allow access to specific users connecting to the network. Each networking device has a unique address called a MAC address (a 12 digit hex number). By inputting the MAC address into the field, you can define whether that device is allowed into your network or not allowed. A MAC Address may sometimes be referred to as a Physical Address. Most networking devices have their MAC Address located on a label on the actual device.
SR20000G USER’S GUIDE 5.0GHz Wi-Fi Settings: Wireless Coverage Controls (5.0GHz) Adjust the output power of the Dual Band Repeater to control the coverage distance of your 5.0GHz Extended Wireless Network. For a smaller coverage area you can select a lower output power. For the maximum wireless coverage select the 100% selection. Note that if you select a lower output power, your connection to your 5.0GHz Home Network will also decrease in range.
SR20000G USER’S GUIDE 5.0GHz Wi-Fi Settings: Access Schedule (5.0GHz) Access Schedules will enable or disable your 5.0GHz wireless access at a set time based on your predefined schedule. This feature is often used for restricting access to all users (such as children, employees, guests) during specific times of the day for parental control or security reasons. a. b. c. d. Enable Access Schedule. Select which days you wish for your Wi-Fi to be available.
SR20000G USER’S GUIDE 5.0GHz Wi-Fi Settings: Advanced Settings (5.0GHz) Advanced Wireless Settings should only be adjusted by technically advanced users. It is not recommended that novice users adjust these settings to avoid degrading wireless performance.Here are a few definitions on some settings. Fragment Threshold: The Default and Recommended setting is at 2346, meaning the High Power Repeater will never fragment any frames that it sends to wireless users.
SR20000G USER’S GUIDE Preamble Type: Defines the length of the Cyclic Redundancy Check for communication between the repeater and roaming wireless users. IAPP: Inter-Access Point Protocol STBC: Space Time Block Coding improves reception by coding the data stream in blocks.
SR20000G USER’S GUIDE 2.4GHz WI-FI SETTINGS 2.4GHz Wi-Fi Settings: Home Network Settings (2.4GHz) The Home Network Settings (2.4GHz) page allows you to adjust settings for your 2.4GHz Home Network connection. These settings are for adjusting the Dual Band Repeater’s Home Network connection after you have already gone through the Smart Setup Wizard and wish to adjust your current configurations. Home Network SSID (2.4GHz): Manually enter the Identification name of the existing 2.
SR20000G USER’S GUIDE 2.4GHz Wi-Fi Settings: Extended Network Settings (2.4GHz) The Extended Network Settings page allows you to adjust settings for your Extended Network. SSID of Extended Network: The name used to identify your Extended Network. This is the name that appears when a user scans for available Wi-Fi networks. Band: Allows you to setup access under a specific combination of Wi-Fi speed standards. Broadcast SSID: Selecting Disable Broadcast SSID will hide the visibility of the repeater’s SSID.
SR20000G USER’S GUIDE Guest Networks (2.4GHz) Click “Enable” to create a Guest Network. Guest Networks provide a separate wireless network, with unique settings for users to connect to. Band: Restrict the Wi-Fi protocol and speed used for the specific Guest Network. SSID: This is the name of your Guest Network. Data Rate: Restrict access to the Guest Network by setting a lower bandwidth by changing the data rate. Broadcast SSID: Disable to hide your SSID from public view.
SR20000G USER’S GUIDE 2.4GHz Wi-Fi Settings: Security (2.4GHz) Wireless security allows you to change the type of wireless security settings for your 2.4GHz Extended Network, Home Network or Guest Networks. Note: If you adjust the security of your Home Network and it is incorrect, the Dual Band Repeater will no longer have a successful connection to your Home Network. Using the drop down menu, you can select which network you wish to configure and may adjust the security settings below.
SR20000G USER’S GUIDE 2.4GHz Wi-Fi Settings: Wi-Fi Protected Setup – WPS (2.4GHz) WPS is a Wi-Fi feature created to make Wi-Fi setup simple and easy. Some wireless routers and adapters support this feature with varying names (i.e. one touch setup or WPS). You may enable WPS setup here by selecting the type of WPS setup you wish to use.
SR20000G USER’S GUIDE User Access allows you to deny access or allow access to specific users connecting to the network. Each networking device has a unique address called a MAC address (a 12 digit hex number). By inputting the MAC address into the field, you can define whether that device is allowed into your network or not allowed. A MAC Address may sometimes be referred to as a Physical Address. Most networking devices have their MAC Address located on a label on the actual device.
SR20000G USER’S GUIDE your 2.4GHz Home Network will also decrease in range. It is recommended that you test your signal strength after each adjustment.
SR20000G USER’S GUIDE 2.4GHz Wi-Fi Settings: Access Schedule (2.4GHz) Access Schedules will enable or disable your 2.4GHz wireless access at a set time based on your predefined schedule. This feature is often used for restricting access to all users (such as children, employees, guests) during specific times of the day for parental control or security reasons. a. b. c. d. Enable Access Schedule. Select which days you wish for your Wi-Fi to be available.
SR20000G USER’S GUIDE 2.4GHz Wi-Fi Settings: Advanced Settings (2.4GHz) Advanced Wireless Settings should only be adjusted by technically advanced users. It is not recommended that novice users adjust these settings to avoid degrading wireless performance.Here are a few definitions on some settings. Fragment Threshold: The Default and Recommended setting is at 2346, meaning the High Power Repeater will never fragment any frames that it sends to wireless users.
SR20000G USER’S GUIDE Preamble Type: Defines the length of the Cyclic Redundancy Check for communication between the repeater and roaming wireless users. IAPP: Inter-Access Point Protocol STBC: Space Time Block Coding improves reception by coding the data stream in blocks.
SR20000G USER’S GUIDE USB STORAGE USB Storage: Local Sharing Share a USB storage device with computers on the local network of the High Power Dual Band Repeater. Insert a USB storage device, such as a flash drive or external hard drive, to the USB port on the back of the Dual Band Repeater and follow the directions below for your operating system. The computer must be connected to your Home Network or Extended Network to access the storage device.
SR20000G USER’S GUIDE Windows 7 and Vista To access the drive from your Windows desktop: Note: If the USB drive does not appear automatically under your Networked devices (Windows 7, Vista or Mac OS X), you will need to Map the Network Drive. a. b. c. Click the Start button Click Computer On the Computer page, the drive should appear on the left hand column under Network as AMPED_REP_USB To Map the Network Drive: a. b. c. d. e.
SR20000G USER’S GUIDE Windows XP To access the drive from your Windows desktop: Note: If the USB drive does not appear automatically under your Networked devices (Windows 7, Vista or Mac OS X), you will need to Map the Network Drive. a. b. c. Click the Start button Click My Computer Click on My Network Places and locate the drive named AMPED_REP_USB To Map the network drive: a. b. c. d.
SR20000G USER’S GUIDE Mac OS X To access the drive from your Mac desktop: Note: If the USB drive does not appear automatically under your Networked devices, you will need to Map your Network Drive (Instructions below). a. b. Open Finder On the left hand menu, under Shared, click AMPED_REP_USB To Map the network drive: a. b. c. d.
SR20000G USER’S GUIDE NETWORK SETTINGS Network Settings: IP Settings IP Address: The IP address of the Dual Band Repeater. Subnet Mask: The subnet of the Dual Band Repeater. Default Gateway: The access point to another network, normally the Dual Band Repeater or your router. DHCP: The Dual Band Repeater includes a feature to help manage the IP addresses within your Extended network and with your Home Network automatically.
SR20000G USER’S GUIDE DHCP Client Range: The range of IP addresses the Dual Band Repeater’s DHCP server will assign to users and devices connecting to the Dual Band Repeater. Static DHCP: You may set a static IP address within your DHCP network. The Dual Band Repeater will track the device via its MAC address and assign it a pre-defined IP address each time the device logs into the network. Obtain IP settings from the Home router or manually enter your IP settings.
SR20000G USER’S GUIDE Network Settings: Wired Port Routing If the Dual Band Repeater is connected to a dual band router, the Dual Band Repeater will automatically route the traffic from all devices connected to the Repeater’s wired ports through the 5.0GHz Home Network to access the web with the fastest speeds. If you choose, you may adjust this setting so that all wired traffic is routed through the 2.4GHz Home Network connection instead.
SR20000G USER’S GUIDE MANAGEMENT FEATURES The Management features on the Dual Band Repeater allow you to view the status of your Dual Band Repeater and adjust other settings such as your System Clock, Passwords, and Firmware Upgrades among other administrative functions.
SR20000G USER’S GUIDE Management: Repeater Status The System Status provides you with a snapshot of your Dual Band Repeater’s current connections and settings. System Information: This section provides you with information on the version and build time of your firmware. This is used to help our support department determine what firmware version your device is running. The Current Date / Time will display the current clock settings of the Dual Band Repeater.
SR20000G USER’S GUIDE Connection State: The Connection State will say "Connected" when there are no problems with the connection to your Home Network. If the Connection State shows "Waiting for Keys" then the WPA/WPA2 security key you entered is incorrect. If the Connection State shows "Scanning" the Dual Band Repeater may be too far away from your home/office router. The Signal Strength display can be updated by refreshing the page and is a good tool to use for finding the optimal installation location.
SR20000G USER’S GUIDE Management: Network Statistics These statistics show the data activity for each network connection. Connection to Home Network: This statistics shows the data activity for all upload and download data between the Home Network and the Dual Band Repeater. Extended Wireless Network: These statistics shows all data activity for all users connected wirelessly to the Dual Band Repeater.
SR20000G USER’S GUIDE Management: System Clock Maintain the internal clock for the Dual Band Repeater by syncing with your computer’s time. Your system clock settings need to be accurate in order for logs and wireless access schedules to work correctly.
SR20000G USER’S GUIDE Management: System Logs System Logs are useful for viewing the activity and history of the repeater. The System Logs are also used by Amped Wireless Elite Support Concierges to help troubleshoot your repeater when needed. It is recommended that you enable all logs in the event that troubleshooting is required. All log entries are deleted each time the repeater reboots or is powered off.
SR20000G USER’S GUIDE Management: Upgrade Firmware Amped Wireless continuously updates the firmware for all products in an effort to constantly improve our products and their user experiences. Check the Downloads page for your product frequently to see if there are any updates. The firmware update is downloaded as a zip file from the Support Webpage link on the left. You will need to have an unzipping program to open the file.
SR20000G USER’S GUIDE Management: Save/Reload Settings Saving your current settings allows you to back-up your current settings which may be reloaded at a later time. This feature may be useful for testing new features and settings without having to worry about returning to a stable platform. To save current settings: a. b. Click Save Select a file name and location To load previously saved settings: a. b. c.
SR20000G USER’S GUIDE Management: Password Settings By default, the Dual Band Repeater does not require a password to log on to the web menu. If you wish to enable a password to protect unauthorized access to the web menu and Smart Setup Wizard, you may enter one here.
SR20000G USER’S GUIDE TECHNICAL SPECIFICATIONS Wireless Standard: 802.11a/b/g/n Frequency Band: 2.4GHz, 5.0GHz Wireless Speed: 2.4GHz: 300Mbps (Tx/Rx) 5.0GHz: 300Mbps (Tx/Rx) Amplifier: Dual 2.4GHz 600mW Amplifiers Dual 5.
SR20000G USER’S GUIDE DEFAULT SETTINGS The default settings for your Dual Band Repeater are listed here. If for some reason you need to return your Dual Band Repeater back to default settings, hold down the Reset button on the back panel for 10 seconds. The Dual Band Repeater will reset back to factory settings as listed below: IP Address: 192.168.1.240 Web Menu Access: http://setup.ampedwireless.com 2.4GHz Extended Network SSID: Amped_Rep_2.4GHz Wireless Security Key (WPA/WPA2 Mixed Mode): wireless 5.
SR20000G USER’S GUIDE TROUBLESHOOTING AND SUPPORT INFORMATION We are here to help. If you have any issues with your Dual Band Repeater, please contact us. To contact Amped Wireless Elite Support use one of the following methods: Phone: 888-573-8820 Email: techsupport@ampedwireless.com Web: www.ampedwireless.
SR20000G USER’S GUIDE Troubleshooting The tips in this guide are listed in order of relevance. Try solution (a) before trying solution (b), etc. Troubleshooting: Web Menu Access Issues I entered http://setup.ampedwireless.com and it failed to open the Web Menu. a. b. c. d. e. f. Make sure your computer is connected to the Dual Band Repeater using the included Ethernet cable. Do not try to connect with a wireless connection. Ensure that the power on the Dual Band Repeater is on.
SR20000G USER’S GUIDE I could NEVER log on to the Dual Band Repeater wirelessly. a. b. Check that your wireless adapter supports WPA2 or WPA wireless security. If it does not then you will need to change the wireless security on the Dual Band Repeater. Go to the Web Menu, select Wireless Settings and then Wireless Security. Select the Extended Network from the drop down menu and either disable security or downgrade the security to WEP. Try connecting again. The connection to the Home Network may be down.
SR20000G USER’S GUIDE c. Reset the Dual Band Repeater back to default settings and try the Smart Setup Wizard again. To reset the Repeater back to default settings, push the Reset Button (on the back panel) down for five (5) to ten (10) seconds then let go. After the Dual Band Repeater has fully reset, use an Ethernet cable and connect to the Dual Band Repeater. Login to the Web Menu at http://setup.ampedwireless.com and run through the Wizard.
SR20000G USER’S GUIDE Troubleshooting: Home Network Connection Issues I cannot connect to my Home Network. I received an error when running the Smart Setup Wizard. a. b. c. d. Your Home Network may be secured. Double check that you have the correct security key to connect to the Home Network. Your Dual Band Repeater may be located too far from your Home Network. Run through the Setup Wizard again. On the SCAN page, your Home Network should show a signal strength of 70% or greater.
SR20000G USER’S GUIDE b. c. Go to the Wireless Settings tab in the web menu and access the Wireless Coverage Controls for your specific wireless network (2.4GHz or 5.0GHz). Make sure the setting is at 100% and try again. Make sure that your Home Network’s wireless SSID is broadcasting and not hidden. If your Home Network SSID is hidden, you will need to manually setup the Dual Band Repeater through the Wireless Settings > Home Network Settings menu.
SR20000G USER’S GUIDE c. d. e. f. g. The Dual Band Repeater may be too far from your home router and not maintaining a signal strength of above 70%. Check the signal strength between the router and the Dual Band Repeater through the web menu (left side): More Settings > Management > Repeater Status. The Signal Strength readout will be under the Home Wireless Network Settings section. This Signal Strength must be above 70%.
SR20000G USER’S GUIDE I have a dual-band router and I cannot repeat a network (or both networks). a. b. c. The Dual Band Repeater will repeat the 2.4GHz signal and the 5.0GHz signal from your router simultaneously. Both wireless networks must have a signal strength of 70% or greater with the Dual Band Repeater for a reliable connection. Make sure that your dual band router is close enough to the Dual Band Repeater to receive a strong signal.
SR20000G USER’S GUIDE I am connected to a Home Network however I do not have Internet Access. a. b. c. The Home Network itself may not have Internet access. Check to see that you have internet access by connecting directly to the Home Network first. If you are able to go online then this is not a problem. If you cannot go online, then the Home Network’s Internet connection must first be resolved. You may have a DNS issue and the Dual Band Repeater is not obtaining the IP settings from your Home Network.
SR20000G USER’S GUIDE The connection to the Home Network seems slow. File transfers take a long time to transfer. a. b. c. You may be too far away from your Home Network. The closer the Dual Band Repeater is to your Home Network, the better its connection will be. The Dual Band Repeater must have a strong signal in order to repeat the signal with fast speeds and further range. Move the Dual Band Repeater closer to your Home Network and try again.
SR20000G USER’S GUIDE 66
SR20000G USER’S GUIDE Troubleshooting: Wireless Issues I am only getting 3 or 4 wireless signal bars on my wireless computer and I am within 10 feet of the wireless router. a. Step back at least 10 feet from the Dual Band Repeater and check your signal again. The Dual Band Repeater emits high power, long range Wi-Fi signals that may confuse your wireless adapter signal reading at close range. The speed and signal are at 100%, however your readout may not be displaying the data correctly. b.
SR20000G USER’S GUIDE d. e. f. Adjust the Antennas of the Dual Band Repeater in different angles. The wireless channel that your network is using may be congested. Change the channel for your router’s 2.4GHz network or 5.0GHz network. The Dual Band Repeater should automatically reconnect to your networks new settings, however if it does not, simply reconfigure the Repeater to your network.
SR20000G USER’S GUIDE Troubleshooting: USB Storage and Web Menu Feature Issues I cannot access my USB storage device after I plug it into the router. Follow the instructions below for your operating system. Windows 7 and Vista To access the drive from your Windows desktop: Note: If the USB drive does not appear automatically under your Networked devices (Windows 7, Vista or Mac OS X), you will need to Map the Network Drive. a. b. c. Click the Start button. Click Computer.
SR20000G USER’S GUIDE Windows XP To access the drive from your Windows desktop: Note: If the USB drive does not appear automatically under your Networked devices (Windows 7, Vista or Mac OS X), you will need to Map the Network Drive. a. b. c. Click the Start button. Click My Computer. Click on My Network Places and locate the drive named AMPED_REP_USB. To Map the network drive: a. Click the Start button. b. Right click My Computer and select Map Network Drive. c.
SR20000G USER’S GUIDE To Map the network drive: a. Open Finder. b. From the menu on the top of the desktop, select Go. c. Select Connect To Server from the drop down menu. d. Enter the address of the network drive: AMPED_REP_USB or shared disk IP address, then click Connect. The Dual Band Repeater freezes or I cannot access the web when a USB storage device is connected. a. b. Remove the USB storage device from the Dual Band Repeater and reboot it by unplugging the power adapter.
SR20000G USER’S GUIDE My Wireless Access Schedule is being erratic and not working at the correct times. a. You need to adjust your Time Zone Settings from the Management Web Menu page. Wi-Fi Protected Setup (WPS) is not working. Push button configuration does not detect the connection. a. The Dual Band Repeater supports WPS connections however some companies may use proprietary code for their own push button configurations.
SR20000G USER’S GUIDE WARRANTY AND REGULATORY INFORMATION The Amped Wireless (A division of Newo Corporation, Inc.) Limited Warranty Warranty Period: The Amped Wireless Limited Warranty is for one (1) year from the date of purchase for new products. Refurbished products carry the Limited Warranty for thirty (30) days after the date of purchase.
SR20000G USER’S GUIDE unenforceable, its remaining provisions shall remain in effect. All costs of shipping the product to Amped Wireless shall be borne solely by the purchaser. Limitations: IN NO EVENT SHALL AMPED WIRELESS’ (NEWO CORPORATION’S) LIABILITY EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, ACCESSORIES OR ITS DOCUMENTATION.
SR20000G USER’S GUIDE visit www.ampedwirleess.com/support to fill out a Return Authorization (RMA) form and obtain a Return Authorization (RMA) number. A dated proof of original purchase and the RMA number is required to process warranty claims. You are responsible for properly packaging and shipping the product at your cost and risk to Amped Wireless.
SR20000G USER’S GUIDE Regulatory Information FCC Statement and Declaration: Amped Wireless declares that this device complies with Part 15 of the FCC Rules and Regulations. Operation of this device is subject to the following two (2) conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation.
SR20000G USER’S GUIDE - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution and Safety Notices: Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
SR20000G USER’S GUIDE This Class B digital apparatus complies with Canadian ICES-003. - English: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two Canada conditions: This device complies with Industry licence-exempt RSS standard(s). Operation is subject to theinterference, following and two conditions: (1) This device may not cause (2) This device must accept any interference, including (1)device.
SR20000G USER’S GUIDE IC Radiation Exposure Statement This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Cet appareil numérique de la classe [*] est conforme à la norme NMB-003 du Canada. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
tech support e-mail web 888-573-8820 techsupport@ampedwireless.com www.ampedwireless.com Amped Wireless A Division of Newo Corporation Copyright © 2012 Amped Wireless / Newo Corporation. All rights reserved. Amped Wireless, Newo Corporation, and the Amped Wireless Logo are registered trademarks or trademarks of Newo Corporation.
