User`s guide

SR20000G
USER’S GUIDE
67
Troubleshooting: Wireless Issues
I am only getting 3 or 4 wireless signal bars on my wireless computer and I am within 10 feet of the wireless
router.
a. Step back at least 10 feet from the Dual Band Repeater and check your signal again. The Dual Band
Repeater emits high power, long range Wi-Fi signals that may confuse your wireless adapter signal
reading at close range. The speed and signal are at 100%, however your readout may not be
displaying the data correctly.
b. The wireless channel that your network is running on may be congested. Change the wireless channel
on your home Router and reconnect the Dual Band Repeater.
The range from the Dual Band Repeater seems low or the speed is slow.
a. Check to see that your wireless output settings are at 100%. Go to the Web Menu, Wireless Settings
and check the Advanced Settings. Make sure the output power is at 100%.
b. Your Dual Band Repeater may be installed in a poor location. Avoid setting up your Dual Band
Repeater in areas with high interference, such as, near fridges, microwaves, metallic objects and low
surfaces. Install the Dual Band Repeater in a higher location if possible.
c. Check the connections of the Antennas to the Dual Band Repeater. Tighten them if necessary.