User`s guide

SR20000G
USER’S GUIDE
65
The connection to the Home Network seems slow. File transfers take a long time to transfer.
a. You may be too far away from your Home Network. The closer the Dual Band Repeater is to your
Home Network, the better its connection will be. The Dual Band Repeater must have a strong signal in
order to repeat the signal with fast speeds and further range. Move the Dual Band Repeater closer to
your Home Network and try again.
b. You may be downloading from the Internet and not within your Home Network or Extended Network.
Files transferred through the Internet are limited by your ISP speed and the data download speeds
from the website that you are downloading from.
c. Your computer may be using an older Wi-Fi adapter with lower speed limits and range capabilities
(802.11b/g).
Network devices connected to the wired ports of the Repeater do not have Internet access.
a. The Wired Port Routing on the Dual Band Repeater may not be defined correctly. While connected to
the Dual Band Repeater, open your web browser and access http://setup.ampedwireless.com
. From
the web menu, go to More Settings > Network Settings > Wired Port Configuration. Check that your
wired ports are routed through an active Home Network connection. If the Dual Band Repeater is
connected to a 2.4GHz network only, adjust the routing so that all wired ports traffic routes through
the 2.4GHz Home Network.