User`s guide

SR20000G
USER’S GUIDE
61
b. Go to the Wireless Settings tab in the web menu and access the Wireless Coverage Controls for your
specific wireless network (2.4GHz or 5.0GHz). Make sure the setting is at 100% and try again.
c. Make sure that your Home Network’s wireless SSID is broadcasting and not hidden. If your Home
Network SSID is hidden, you will need to manually setup the Dual Band Repeater through the Wireless
Settings > Home Network Settings menu.
My Dual Band Repeater was working fine previously, but now I can no longer access the Internet through
the Dual Band Repeater. Or, I had a POWER OUTAGE and now the Dual Band Repeater no longer works.
The Dual Band Repeater should automatically heal itself and reconnect to your wireless network. However, in
the event that it does not and you are not able to access the Internet or your home network please try the
following options:
a. Reboot the Dual Band Repeater, wait 3 minutes for the Dual Band Repeater to reconnect to your
network and try to access the Internet.
b. The connection to your Home Network may have been dropped or the router settings may have
changed. Changes to the router could be a result of several events, such as a power outage. When
this occurs, connect to the Dual Band Repeater and access the setup menu using the web
address: http://setup.ampedwireless.com
. Run the Smart Setup Wizard to reconnect the Repeater to
your network.