User`s guide

SR20000G
USER’S GUIDE
43
DHCP Client Range: The range of IP addresses the Dual Band Repeater’s DHCP server will assign to users and
devices connecting to the Dual Band Repeater.
Static DHCP: You may set a static IP address within your DHCP network. The Dual Band Repeater will track the
device via its MAC address and assign it a pre-defined IP address each time the device logs into the network.
Obtain IP settings from the Home router or manually enter your IP settings.
Auto-Load Menu (Auto-DNS): When the Dual Band Repeater loses connection to your Home Network it will
automatically redirect your web browser to the web menu. To turn this feature off, you can disable Auto-DNS.
Note: Disabling Auto-DNS will require that you access the web menu using the IP address of this device. It is
recommended that you note your IP address before changing this mode. If you are no longer able to access
the web menu, you will need to perform a hardware reset.
Domain Name: The Domain Name allows you to change the URL which is used to access the Setup Menu for
the Dual Band Repeater. For example, entering http://setup.ampedwireless.com into your web browser while
connected to the Dual Band Repeater, will guide you to the Web menu for the Dual Band Repeater. By
changing the Domain Name, you will change the URL entered to access the Web menu. If you forget the
Domain Name you entered and can no longer access the Web menu, then you will need to reset your Dual
Band Repeater to default settings by holding down the reset button on the back panel for 5-10 seconds.