Setup guide

The Setup Wizard will now check if your
settings are correct. This process may take up to
2 minutes. Do not refresh the web page. The
page will automatically reload with the
connection status. If your settings were entered
incorrectly, the wizard will inform you to
re-enter your settings.
3
1
2
4
8
Find an optimal setup location between your wireless router and
your wireless dead zone
Welcome to the Smart Setup Wizard
The wizard will guide you through the setup of
your Dual Band Range Extender.
Click Next to begin.
Setup Summary
If your wireless home network(s) has security
enabled, you will need to enter the security
key here. If you selected a dual band network
to repeat, you will need to enter both security
keys here.
If your wireless home network(s) does not have
security enabled, leave the security field blank.
Click Next to continue.
6
Home Network Security Settings (If necessary)
3
Recommended browsers: Google Chrome, Safari or Internet Explorer (8.0 and up). Do not use Firefox.
http://setup.ampedwireless.com
Open your web browser
If the URL fails to open try: http://192.168.1.240
Enter the setup web address into your browser:
Connect your Mac or PC to the Dual Band Range Extender
7
Configure Settings for your Extended Networks
The Dual Band Range Extender will create two
extended networks: a 2.4GHz Extended Network
and a 5.0GHz Extended Network.
The IDs of your Extended Networks are:
Amped_Rep_2.4GHz and Amped_Rep_5.0GHz
To change them, enter a new name in the SSID field.
Users connecting wirelessly to the Dual Band Range
Extender will use this ID to identify your Extended
Network.
The default Security Key (WPA/WPA2 Mixed
Mode) for both (2.4GHz and 5.0GHz) Extended
Networks is: wireless
To change it, enter a new key in the Security Key
field. The key must be at least 8 characters long.
Click Next to apply your settings. The Dual Band
Range Extender will reboot.
Attach the two included antennas.
Connect the included network cable to an
available network port on your computer.
Attach the Power Adapter to the Dual Band
Range Extender’s port and an
available power outlet.
PWR
Need Help? Give us a call.
Phone: [phone]
Email: [e-mail]
Web: www.ampedwireless.com/support
?
If there was a problem with your configuration, the Smart Setup Wizard will inform you to restart the Wizard and select
another network to repeat. If you continue to experience problems, please contact Amped Wireless Elite Support.
Congratulations, the Dual Band Range Extender
is now successfully configured. Your settings are
now saved. You may now detach the Ethernet
cable from your computer and connect wire-
lessly to the Dual Band Range Extender.
Print the Setup Summary details and save it
for future reference.
If you haven’t already positioned your Dual Band
Range Extender in an optimal location, you may do
so now. All Range Extender settings are saved and
can be safely powered off for relocation.
You may also attach additional wired network
devices to the wired ports on the back of the
Dual Band Range Extender.
— R E A D F I R S T —
SETUP GUIDE
High Power Wireless-N 600mW Gigabit Dual Band Range Extender / Repeater
IMPORTANT:
PLACE THE DUAL BAND RANGE EXTENDER / REPEATER IN A LOCATION
WHERE IT CAN RECEIVE A STRONG SIGNAL FROM YOUR WIRELESS ROUTER
This can be done before or after setup is complete. The Dual Band Range Extender / Repeater will save your settings.
If you are connecting to a dual band router, both 2.4GHz and 5.0GHz connections should be greater than 70%.
>70%
RECOMMENDED
SIGNAL STRENGTH
2.4GHz and 5.0GHz
(if available)
Disconnect your PC from wireless networks, open your browser and try again.
Windows 7 & Vista (example)
Click on the Wireless icon to see available wireless networks
(For Vista, click Start > Connect To).
Select your current wireless network and click Disconnect.
Power the Dual Band Range Extender off and back on and try
http://setup.ampedwireless.com again.
Wireless Network
Wireless Network
1)
2)
3)
IF YOU HAVE PROBLEMS ACCESSING THE WEB MENU...
Accessing the Smart Setup Wizard does not require Internet access. The menu is served from the Dual Band Range Extender.
If you are still having trouble accessing the Web Menu, disconnect the cable from your computer to the Range Extender.
Connect wirelessly using the SSID: Amped_Rep_2.4GHz or Amped_Rep_5.0GHz and Password: wireless and try again.
Need Help? Give us a call.
Phone: [phone]
Email: [e-mail]
Web: www.ampedwireless.com/support
?
Internet
Home/Office Network
Dead Zone
Single or Dual Band
Wireless Router
Network Bridge
Dual Band Range Extender
Connect up to
wired devices
G I G A B I T
5
Network Storage
PCs/Laptops
A/V Devices
and more!
SR20000G
>70%
RECOMMENDED
SIGNAL STRENGTH
2.4GHz and 5.0GHz
(if available)
Scan for a Wireless Network to Repeat
5
Click Scan to begin scanning for nearby wireless
networks (2.4GHz and 5.0GHz).
Highlight and select the wireless network(s)
that you wish to repeat. If you have a dual band
router, select BOTH the 2.4GHz and 5.0GHz
network names.
If you are connecting to a 2.4GHz and a 5.0GHz
network, BOTH networks must have greater than
70% signal strength.
Click Next to continue.
If you do not see your desired wireless networks,
move the Dual Band Range Extender closer to the
router and scan again as it may be out of range.
Recommended Signal
Select the wireless network with
a signal strength greater than 70%
for the most reliable connection.
Connecting to a weak signal may result in
slower speeds or intermittent connectivity.
>70%