User`s guide

SR150

USERS GUIDE

Wizard again. After you have successfully reset the Home Network connection, try connecting

wirelessly again.

I can no longer access the Web Menu or the Smart Repeater no longer responds.

a. Connect to your Smart Repeater and try to access http://setup.ampedwireless.com using your web

browser.

b. If you are advanced in networking troubleshooting, log onto your home router’s web interface. Look

for the DHCP client list and try to find the IP address of your Smart Repeater assigned by your home

router. Once you have it, connect to the Smart Repeater using an Ethernet cable. Open your web

browser and enter the IP address into the address bar.

c. Reset the Smart Repeater back to default settings and try the Smart Setup Wizard again. To reset the

Repeater back to default settings, push the Reset Button (on the back panel) down for five (5) to ten

(10) seconds then let go. After the Smart Repeater has fully reset, use an Ethernet cable and connect

to the Smart Repeater. Login to the Web Menu at http://setup.ampedwireless.com and run through

the Wizard.