User`s guide

SR150
USERS GUIDE
39
I have a dual-band router and I cannot repeat it.
a. Log into the Web Menu for your dual-band wireless router and adjust the wireless settings. Change
the wireless band to 2.4GHz single band mode only. Disable the 5GHz wireless band.
I cannot find any wireless networks (Home Networks) to repeat.
a. The Smart Repeater may be out of range. Move the Smart Repeater closer towards the wireless
router and try the Setup Wizard again from the Web Menu.
b. The antenna on your Smart Repeater may be loose. Tighten the antenna connection and try again.
c. The wireless Home Network may not be a compatible wireless network (802.11b/g/n).
I am connected to a Home Network however I do not have Internet Access
a. The Home Network itself may not have Internet access. Check to see that you have internet access by
connecting directly to the Home Network first. If you are able to go online then this is not a problem.
If you cannot go online, then the Home Network’s Internet connection must first be resolved.
b. You may have a DNS issue and the Smart Repeater is not obtaining the IP settings from your Home
Network. Try to reboot the Smart Repeater and then accessing a website. If that fails, then reboot
the Home Router to see if that fixes it.