User`s guide

SR150
USERS GUIDE
38
My Smart Repeater was working fine previously but now I can no longer access the Internet through the
Smart Repeater.
a. The connection to your Home Network has been dropped. This can be caused by several events to
your home wireless connection. When this occurs you may rescan for another network by accessing
http://setup.ampedwireless.com to connect to and repeat or you may try to fix the issues with your
Home Network and your home wireless router.
b. If you cannot access the setup menu, check to see that your Smart Repeater is still on. Reboot the
Smart Repeater by unplugging the power adapter and plugging it back in. Check to see if your
connection has been reestablished by viewing a website. If you do not have a connection, logon to
http://setup.ampedwireless.com and configure a new Home Network connection.
c. Check to see that your home wireless router is still on. If it has been turned off please turn it back on.
The Smart Repeater should automatically reconnect to your Home Network within 10 minutes.
d. Check to see that your home wireless router settings have not changed. Any changes to the SSID,
security, or channel number from the original settings will disconnect the Smart Repeater’s
connection to the home network. If you are not sure which settings have been changed, simply run
the Smart Setup Wizard again from the web menu and reconfigure your Home Network connection.