User`s guide
SR150
USERS GUIDE
30
Management: Upgrade Firmware
The Wireless Smart Repeater uses internet software (firmware) to operate. In the event that a new firmware
file is available you may update it here. During the upgrade process DO NOT power off the device to avoid
damage to the Wireless Smart Repeater. To check for new firmware click the Check button. If a new
firmware is available you will be given the option to install.
To manually upgrade your firmware:
a. Download the file from the www.ampedwireless.com/support website and remember the location
where you saved it. Firmware files may also be provided by Amped Wireless support reps.
b. Click Browse and locate the file
c. Click Upload to begin upgrading.
Note: Firmware files normally have a .bin file extension.