User`s guide

R10000
USER’S GUIDE
15
Configure your Wireless Settings
The default SSID of the High Power Router is “Amped_Network”
To change it, enter a new name in the SSID field. Users
connecting wirelessly to the High Power Router will use this ID
to identify your wireless network.
The default Security Key (WPA/WPA2) for your wireless network
is “wireless”.
To change it, enter a new key in the Security Key field. The key
must be 8-characters minimum.
Click Next to apply your settings. The High Power Router will
reboot. This process may take up to 1 minute. The page will
automatically reload after the countdown. If it does not, you
may need to refresh the page manually or check your
connection to the router.