User`s guide

SR20000G
USER’S GUIDE
64
64
I have a dual-band router and I cannot repeat a network (or both networks).
a. The Range Extender will repeat the 2.4GHz signal and the 5.0GHz signal from your router
simultaneously. Both wireless networks must have a signal strength of 70% or greater with the Range
Extender for a reliable connection. Make sure that your dual band router is close enough to the Range
Extender to receive a strong signal.
b. Check to make sure that you have the correct security key for both the 2.4GHz and 5.0GHz network of
your dual band router. These keys may sometimes be different from each other.
c. Ensure that your dual band router does not have any security features enabled, such as Mac address
filtering. If it does, disable it and try again.
I cannot find any wireless networks (Home Networks) to repeat.
a. The Range Extender may be out of range. Move the Range Extender closer towards the wireless router
and try the Setup Wizard again from the Web Menu.
b. The antenna on your Range Extender may be loose. Tighten the antenna connection and try again.
c. The wireless Home Network may not be a compatible wireless network (802.11a/b/g/n).