User`s guide

SR20000G

USER’S GUIDE

b. Go to the Wireless Settings tab in the web menu and access the Wireless Coverage Controls for your

specific wireless network (2.4GHz or 5.0GHz). Make sure the setting is at 100% and try again.

c. Make sure that your Home Network’s wireless SSID is broadcasting and not hidden. If your Home

Network SSID is hidden, you will need to manually setup the Range Extender through the Wireless

Settings > Home Network Settings menu.

My Range Extender was working fine previously, but now I can no longer access the Internet through the

Range Extender. Or, I had a POWER OUTAGE and now the Range Extender no longer works.

The Range Extender should automatically heal itself and reconnect to your wireless network. However, in the

event that it does not and you are not able to access the Internet or your home network please try the following

options:

a. Reboot the Range Extender, wait 3 minutes for the Range Extender to reconnect to your network and

try to access the Internet.

b. The connection to your Home Network may have been dropped or the router settings may have

changed. Changes to the router could be a result of several events, such as a power outage. When this

occurs, connect to the Range Extender and access the setup menu using the web address:

http://setup.ampedwireless.com. Run the Setup Wizard to reconnect the Range Extender to your

network.