High Power Wireless-N 600mW Smart Router Manual

R10000
USER’S GUIDE
15
Configure your Wireless Settings
The default SSID of the High Power Router is “Amped_Network”
To change it, enter a new name in the SSID field. Users connecting
wirelessly to the High Power Router will use this ID to identify your
wireless network.
The default Security Key (WPA/WPA2) for your wireless network is
“wireless”.
To change it, enter a new key in the Security Key field. The key must
be 8-characters minimum.
Click Next to apply your settings. The High Power Router will reboot.
This process may take up to 1 minute. The page will automatically
reload after the countdown. If it does not, you may need to refresh
the page manually or check your connection to the router.