User`s guide

AV3000
USER’S GUIDE
43
I can no longer access the Web Menu or the A/V Net Connect no longer responds
a. Connect to your A/V Net Connect and try to access http://setup.ampedwireless.com using your web
browser.
b. If you are advanced in networking troubleshooting, log onto your home router’s web interface. Look
for the DHCP client list and try to find the IP address of your A/V Net Connect assigned by your home
router. Once you have it, connect to the A/V Net Connect using an Ethernet cable. Open your web
browser and enter the IP address into the address bar.
c. Reset the A/V Net Connect back to default settings and try the Smart Setup Wizard again. To reset
the Repeater back to default settings, push the Reset Button (on the back panel) down for five (5) to
ten (10) seconds then let go. After the A/V Net Connect has fully reset, use an Ethernet cable and
connect to the A/V Net Connect. Login to the Web Menu at http://setup.ampedwireless.com and run
through the Wizard.
The connection to the Home Network seems slow. File transfers take a long time to transfer
a. You may be too far away from your Home Network. The closer the A/V Net Connect is to your Home
Network, the better its connection will be. The A/V Net Connect must have a strong signal in order to