User`s guide

AV3000
USER’S GUIDE
42
I can no longer connect to the A/V Net Connect wirelessly
a. Power on and off the A/V Net Connect and try again.
b. The connection to the Home Network may be down. Use an Ethernet cable and connect directly to
the A/V Net Connect. Access http://setup.ampedwireless.com and run through the Smart Setup
Wizard again. After you have successfully reset the Home Network connection, try connecting
wirelessly again.
I could NEVER log onto the A/V Net Connect wirelessly
a. Check that your wireless adapter supports WPA wireless security. If it does not then you will need to
change the wireless security on the A/V Net Connect. Go to the Web Menu, select Wireless Settings
and then Wireless Security. Select the Extended Network from the drop down menu and either
disable security or downgrade the security to WEP. Try connecting again.
b. The connection to the Home Network may be down. Use an Ethernet cable and connect directly to
the A/V Net Connect. Access http://setup.ampedwireless.com and run through the Smart Setup
Wizard again. After you have successfully reset the Home Network connection, try connecting
wirelessly again.