User`s guide

AV3000
USER’S GUIDE
37
Troubleshooting
The tips in this guide are listed in order of relevance. Try solution (a) before trying solution (b) etc…
I entered setup.ampedwireless.com and it failed to open the Web Menu.
a. Make sure your computer is connected to the A/V Net Connect using the included Ethernet cable. Do
not try to connect with a wireless connection. Ensure that the power on the A/V Net Connect is on.
b. Close your current web browser and reopen it. Try the web address again.
c. Make sure your computer is NOT connected to ANY wireless networks. If it is, disconnect it and try to
access the Smart Setup Wizard again.
d. Try to open your web browser to the default IP address by putting this number into your web browser
instead: 192.168.1.240
e. Power off (unplug the power adapter) the A/V Net Connect and power it back on. Try again.
f. Reset your A/V Net Connect to default settings by holding the Reset Button (located on the back
panel) for ten (10) seconds and try again