User`s guide

AV3000
USER’S GUIDE
15
If the Home Network connection fails try the following…
a. Check to see that your Home Network security settings are correct.
b. Check that your Home Network router’s DHCP server is enabled.
c. Try changing the channel of the Home Network router to a higher channel number (5-11) and run the
Setup Wizard again.
d. If possible, check the Internet connection for your Home Network wireless router. Connect directly to
your Home Network wireless router. If you are unable to access the internet through the Home
Network wireless router you must first fix this problem. The A/V Net Connect will not be able to
obtain internet access through a router that does not have internet access. Once Internet access is
restored, connect to the A/V Net Connect again and retry the Smart Setup Wizard.
e. Return to the Smart Setup Wizard and attempt to connect to another Home Network known to have
Internet access.
f. Try to reboot (unplug the power from the A/V Net Connect and plug it back in) the A/V Net Connect
and check to see if the connection is established (some networks may be very slow and take longer
than the allotted time for the A/V Net Connect to successfully connect).