User`s guide

AV3000
USER’S GUIDE
10
Scan for a Wireless Network
Click SCAN to begin searching for available wireless networks to
repeat.
Highlight your network and click Next to continue.
If you fail to find any wireless networks, the A/V Net Connect may
be placed too far from the wireless network that you are trying to
repeat. Move your A/V Net Connect closer to the wireless network
that you are trying to repeat and click SCAN again.
The Scan results page will display information regarding the name of
the network (SSID), the channel which the wireless network is
operating on and the type of network that it is. AP stands for Access
Point and is the standard type of wireless network. The results page
will also display whether or not your network has security and what
the signal strength is coming from each specific network detected.