User's Manual

AMPAK Technology Inc. www.ampak.com.tw Proprietary & Confidential Information

Doc. NO:

1. AP6356SDPB_I Carrier Board Introduction

AP6356SDPB_I Carrier board (EVB) likes as figure1. That is designed for IEEE802.11

a/b/g/n/ac 2x2 WLAN with integrated Bluetooth. It is subject to provide a convenient

environment for customer’s verification on WiFi or Bluetooth function. There are many

controller pins and reserved GPIO on Carrier board which describes as below.

Figure1. Top view of AP6356SDPB_I CB

Interface highlights:

1. U1: AP6356SDPB_I SIP module.

2. A1: I-PEX connector let RF signal in/out path, you could connect with RF cable or

Dipole antenna.

3. A2: I-PEX connector let RF signal in/out path, you could connect with RF cable or

Dipole antenna.

4. Gold finger: WLAN and BT communication and control pins. Follow PCI Express

Mini Card pin outs definitions

Edag finger