Specifications

Page 5
ZONESENSE PLUS OPERATION & PROGRAMMING
EARTH FAULT
Earth Fault – Yellow Is an indication only to warn
of a fault to earth that may affect a mandatory function. A plug jumper facility
is provided to disable the earth monitoring if necessary
EXTERNAL
ALARM FAULT
External Bell Fault – Yellow Illuminates when an open or short circuit
fault condition is detected on the external alarm circuit.
WARNING SYSTEM
FAULT
Warning System Fault – Yellow Illuminated by a fault condition of the
warning system output.
ACF STATUS
ACF Status - Fault / Isolate – Yellow Illuminates when the ACF output
is in fault (flashing) or isolated (steady).
ASE STATUS
ASE Status - Fault – Yellow Illuminates when a fault condition is
detected on the ASE circuit.
3.2 FireFighter Facility Indicators
There are five indicators within the FireFighter Facility area of the front panel.
ALARM
Alarm – Red: Alarm is a general fire indicator that flashes until all alarms have
been acknowledged or isolated. Once acknowledged it is lit steady until reset.
FAULT
Fault – Amber Is a general fault indicator that flashes if a fault is present on any
part of the system.
ISOLATED
Isolated – Amber Is a general isolate indicator that is illuminated if a Zone, Bell,
Warning System or ACF is isolated.
ISOLATE
EXTERNAL
ALARM
External Bell Isolate – Amber Illuminated by the isolation of the “External Bell”
output. This indicator is integral with the “External Bell Isolate” button.
ISOLATE
WARNING
SYSTEM
Warning System Isolate – Amber Illuminated by the isolation of the ‘Warning
System” output. This indicator is integral with the “Warning System Isolate” button.
3.3 Zone Indicators
There are two indicators for each alarm zone fitted to the panel.
1. Zone Alarm – Red The indicators show individual zone/s in alarm. On alarm the LED
will flash until the alarm is acknowledged. Once acknowledged the LED will be
continuously illuminated until the panel is reset.