Specifications

Page 9
ZONESENSE PLUS OPERATION & PROGRAMMING
Sounders
Press Enter then Move Left or Move Right to select the required Sounder (1–8). OR
Press Move right to access Voltage. The LCD indicates if the selected Sounder Board
output is;
Sample Sounder Screens
Off and Normal, or Off and in Fault, or On and Normal, or On and in Fault, or Isolated and
Normal, or Isolated and in Fault.
Inputs
Press Enter then Move Right or Move Left to view the status of each input (1 to 16) on
the Input Board.
Sample Input Screens
Voltage
Press Move right to access Software OR press Enter and the Battery Voltage will be
displayed, pressingMove Right will display the Charger Voltage (27.2volts ), pressing
Move Right again will display the System Voltage.
Voltage Screens
Software
Displays the installed version of software. ( This is for information only )
End of Sub - Menu
Returning to STATUS in the Main Menu Move Right to access FAULTS
4.2 Faults
Pressing Enter will display all faults in a sequential order. If there is more than one fault on the
system the operator can scroll through each fault by using the Move Left and Right keys.
Pressing Enter again at each Fault will display more detailed information.
SOUNDER 2
ON / NOR
SOUNDER 8
OFF / NOR
SOUNDER 7
OFF / FLT
INPUT 1
OFF / NOR
BATT V
27.2V
CHRGR V
27.2V
SYSTEM V
27.2V
SOFTWARE
Ver A1 . 2