Specifications
Page 27
FIREFINDER SERIES II INSTALLATION, COMMISSIONING &
OPERATION
7 The Main Menu
The MAIN MENU is accessed by pressing MENU.
FUNCTION
MENU
MAIN MENU
0: ALARMS 1:PREALARMS 2: FAULTS
3:ISOLATES 4: STATUS 5:TEST
SELECT NO.
Figure 29: The Main Menu
Numbering System: denotes the menu structure number and denotes the sub-menu
numbering.
Pressing the appropriate number on the keypad while in the MAIN MENU the user can view any;
FIRE ALARMS
PRE-ALARMS
FAULTS; Pressing brings up a sub-menu from which a more detailed description of the
fault can be displayed. With a Fault present select a field ( to ) to view details of the fault.
Zones Sensors
Loops
Modules
Comms
Power Supply
Brigade
Test Failures
Sounders
ISOLATES on the system.
If there are no alarms, pre-alarms, faults or isolates, a message, e.g. NO ZONES OR SENSORS IN
ALARM will be displayed for 1 to 2 seconds and then the display will return to the Main menu.
7.1 Status Menu
Is pressed to access the STATUS MENU.
STATUS MENU
0: LOOPS 1: MODULES 2: I/O
3: SYSTEM 4:AVALUES
SELECT NO.
STATUS MENU
0: LOOPS 1: MODULES 2: I/O
3: NETWORK 4: SYSTEM 5:AVALUES
SELECT NO.
FACP WITH NETWORKING
FACP WITHOUT NETWORKING
Figure 30: The Status Menu
From the STATUS MENU the status of system components and settings can be selected and
displayed as listed below. Note that different screens are displayed for a system with and without
networking.
Press
Loops: Enter the loop number and the LCD will display its status, e.g. normal, type of fault
etc.
Press to print all devices on the loops (Press RESET to stop printing)
Press to print totals of the loops (Press RESET to stop printing)
Modules: Select the type of module, Slave, P/S, Brigade or External LED
Mimic and follow the screen prompts to display the status of the selected field.
I/O: The LCD will display the status of an input or output in a panel or on a loop.
Press to display Output status – IN A PANEL or ON A LOOP
Press to display Input status - – IN A PANEL or ON A LOOP