Specifications

Page 60
FIREFINDER SERIES II CONFIG MANAGER SESSION 6
7.5 Adding a High Level Interface (HLI)
Another item that may be selected and added to the system is a HLI. To add a HLI to the system left
click on the HLI icon as shown so that is highlighted.
Figure 73: Adding a HLI Depending upon the configuration of the system a HLI may be fitted by left clicking
on any controller be it a LCD mimic or Panel. To delete the interface right click on it and select DELETE. In
the example shown above we have them fitted to each Controller in the system.
7.5.1 High Level Interface Options (HLI)
The control settings are accessed by double left clicking on the HLI or right clicking and selecting
Edit. (Bold & Italic notes refer to correspondingly numbered HLI’s in the diagram above.)
Figure 74: High Level Interface Settings
High Level Interface: Provides a text based output for dumb interfaces like nurse call and paging
systems. Available to HLI’s 1, 2 &3 above