Specifications

Page 49
FIREFINDER SERIES II CONFIG MANAGER SESSION 6
5.6.1 Nurse Fire Station
To set the Nurse Fire Station parameters click on the SmartTerminal tab and the following screen
will be displayed. Under the assigned SmartTerminal Card designator, 1 to 30, click in the Active
box to change the “N” (NO not fitted) to “Y” (YES fitted) and then enter or type in a “Description”. The
description should be a name given to the Nurse Fire Station (NFS) or its physical location. Double
click the NFS Enable Icon to Enable. This will allow the parameters for Acknowledge timeout and
Investigate timeouts to be set.
Note: A maximum of 30 Nurse Fire Stations can be used in the configuration of the
FACP.