Manualshelf

Specifications

ManualsBrandsAmpac ManualsFire AlarmsFireFinder Series II AS442
41424344454647484950
Page 44
FIREFINDER SERIES II CONFIG MANAGER SESSION 6
Fault: If a fault condition is seen at the input to the I/O it will initiate the fault
sequence as set in the configuration, display the condition on the LCD, enters it
into the Logs and automatically “Acknowledges” the fault.
To view and print the settings select the icon and print.
Figure 58: The Module Apollo I/O View and Print Screen
Note: To edit this information / screen return to the Edit Sensor Properties, double click on the
More + box then edit in the new screen, returning by exiting in the normal way.
Fig 1: Module Edit I/O Screen
Sens: The Sensor number is set and cannot be modified.
Description: The description is limited to 33 characters and may contain numbers or characters.
Active: Toggling the values in this column will activate or deactivate the input or output.
I/O: The I/O number is set and cannot be modified.
Description: The description is limited to 33 characters and may contain numbers or characters.
Input / Output, Active / Inactive: Toggling the values in this column will activate or deactivate the
input or output.