Specifications

Page 21
FIREFINDER SERIES II CONFIG MANAGER SESSION 6
4.6.3 Controller Setting or Editing
 The following screens have been compressed for the purposes of explanation
Edit Modules Apollo and Conventional. To physically edit each parameter left click in the
appropriate square and enter or change the existing setting / information.
 Both drop down screens are shown displayed, this is for explanation purposes only.
Figure 29: Controller Settings - Apollo Loop Module
Figure 30: Controller Settings - Conventional Module
Edit Module Input / Output. Here the Input and Output descriptions can be edited and the Inputs
and Outputs can be made active / inactive. To physically edit the description click in the box and edit
from the keyboard in the normal way. To set an Input or Output to active / inactive double click on
the “Y” [Yes] active or “N” [No] inactive.
Figure 31: Controller Setting - Input / Output Module