Specifications

Page 17
FIREFINDER SERIES II CONFIG MANAGER SESSION 6
4.4.3 Call Point / DBA
Shown is the Manual Call Point selected screen. By default the MCP is ON
Figure 23: Panels Settings - Call Point / DBA
Manual Call Point: Click on the check box (ticked) to enable the MCP.
Direct Brigade Alarm: Click on the check box (ticked) to enable the DBA. Note the selections
shown left and below will no longer be available.
OFF: Click to disable the selection.
Desc: Type in a name or description / location of the MCP.
Zone: Allocate the Zone, 1 to 999, which the MCP will be associated with.
Page: Displays the “page” in SmartGraphics that the MCP will appear on.
Groups: Enter the Group/s to be coupled to the MCP
Bell, Auxiliary, Warning, Alarm, Sprinkler Output/s and Alarm LED: Check (tick) if the MCP is to
operate that output / LED.