Specifications

Page 73

FIREFINDER PLUS

(

AUST

)

INSTALLATION

COMMISSIONING OPERATION

12.14.6 SmartTerminal Controls and Indicators

All controls, except for the controls Enable / Disable Keyswitch, are of a momentary push button style

and operate in exactly the same way as does the FACP itself.

Figure 99: SmartTerminal Front Panel Layout

12.14.7 SmartTerminal Screen Format

There are 3 events that can be reported and displayed by SmartTerminal. The types of event are;

 Fire

 Faults and

 Disables.

The types of events are only associated with devices and detectors hence faults associated with

modules, loops O/C – S/C, power supplies and so forth are not reported on the LCD.

The SmartTerminal has front panel indicators for each type of event. When SmartTerminal is

configured not to report a type of event and that event type is present (and the corresponding front

panel indicator is illuminated on the SmartTerminal), then a standard information screen is displayed

on the LCD stating the system is not normal and the operator should see the FACP.

Alarm: If configured the screen format for reporting loop / device / zone fire condition is:

FIRE – ORIGIN:Zzzz RECENT:Zzzz TOTAL:XXX

----------------------------------------

Zzzz FIRE

<date> <time> CONTROL*

ZONE FIRE XXX OF XXX DEVICE►

----------------------------------------