Specifications

Page 46
EN54 FIREFINDER PLUS INSTALLATION,COMMISSIONING & OPERATION
8.8.3 Input
Press  INPUT:
By following the screen prompts as above Edit or Delete an INPUT in a panel or a loop.
Screen: PROGRAM MENU SELECTING AN INPUT
 IN A PANEL
 ON A LOOP
I/O MODULE
LOOP
Select I/O MODULE NO. then
Select LOOP NO. then
INPUT
DEVICE
Select I/P NO then
Select DEVICE NO. then
EDIT / DELETE DESC
INPUT
Select INPUT NO. then button
ALPHA BUTTONS ARE ACTIVE
EDIT Lx Sx I/Px DESC STRING DESC
8.8.4 Output
Press  OUTPUT:
By following the screen prompts as above Add, Edit or Delete an output in a panel or on a loop.
8.8.5 Panel Based MCP
Press  to EDIT
8.8.6 Sub Address
Press  to EDIT
8.8.7 Watchdog
Press  This Function provides a counter to record any re-initialisation of the processor. If due to a
software failure the panel is automatically reset then the counter will increment by 1. The maximum
count is 99 after which the counter resets to 00. Pressing  will reset the counter. When the panel
is commissioned this counter MUST be reset to 0 as must be the Events Logs.
8.8.8 Zone programming
Press  to EDIT