Specifications

Page 45
EN54 FIREFINDER PLUS INSTALLATION,COMMISSIONING & OPERATION
EDIT Z I/O GROUPS
GROUP1: GROUP2: GROUP3:
GROUP4: GROUP5: GROUP6:
Enter GROUP NO.
AC:3Z ALM:0 PALM:0 FLT:0 DIS:0
Figure 66: Zone I/O Groups
After scrolling through the groups and entering what I/O GROUPS will be turned on by what
module/s or device/s in a zone/s the operator is prompted to press to confirm the entries
and / or changes.
8.8.2 Device
Press  DEVICE:
Use these buttons to EDIT and move through wording & numbering
Use these buttons to MOVE between fields i.e.: DESC & TYPE and next
parameter
Enter the and number then scroll through the following screens.
Press or Press
 To EDIT or  to DELETE
1. EDIT LxSx DESCRIPTION AND TYPE STRING. Edit then. Press
e.g.: DESC Loop 1 Sensor 1
TYPE SMOKE
2. Allocate / Edit the Device to a Zone and set the device type then. Press
e.g.: XP95 Photo, XP95 Heat etc-
3. Set /Edit and display the Output Configurations or options then. Press
e.g.: Latching, AVF, Non-latching etc
4. Set / Edits and enables / disables the day/night settings then. Press
5. Allocates / Edits the Loop and Devices Groups.
After scrolling through the groups a prompt tells the operator to press to confirm the
changes.