Specifications

Page 33
EN54 FIREFINDER PLUS INSTALLATION,COMMISSIONING & OPERATION
7.7 Status
Pressing  Displays the Status of the system
STATUS MENU
0:LOOPS 1:MODULES 2:I/O
3:BRIGADE 4:SYSTEM 5:AVALUES
6:ADD ONS
SELECT NO.
AC:2Z ALM:0 PALM:0 FLT:0 DIS:0
Figure 34: The Status Menu (No networking)
STATUS MENU
0:LOOPS 1:MODULES 2:I/O
3:BRIGADE 4:NETWORK 5:SYSTEM
6:AVALUES 7:ADD ONS
SELECT NO.
AC:2Z ALM:0 PALM:0 FLT:0 DIS:0
Figure 35: The Status Menu (Networking)
From the STATUS MENU the status of system components and settings can be selected and
displayed as listed below.
Note: Different screens are displayed for a system with and without networking.
Press
 Loops: Enter the loop number and the LCD will display its status, e.g. normal, type of fault
etc.
LOOP NO:1
STATUS: NORMAL
0:PRINT ALL DEVICES 1:PRINT TOTAL
AC:2Z ALM:0 PALM:0 FLT:0 DIS:0
Figure 36: Display Loop Status
 Modules: Select the type of module, Slave and P/S
DISPLAY MODULE STATUS
0:SLAVE 1:POWER SUPPLY
SELECT NO.
AC:2Z ALM:0 PALM:0 FLT:0 DIS:0
Figure 37: The Display Module Status display
 I/O: The LCD will display the status of an input or output in a panel or on a loop, Outputs 
and Inputs .