Specifications

Page 26
EN54 FIREFINDER PLUS INSTALLATION,COMMISSIONING & OPERATION
After selecting the Loop number press this button to enter the device
number for the device to be interrogated.
Press this button followed by a number e.g. ZONE 4 to select the required zone.
Press this button after selecting the Zone number or the Loop and Device numbers to
display the state of the device.
Press and hold this “display” button while using the buttons to adjust the LCD
contrast (Access level 2 required)
- These buttons are used to navigate around the panel’s menus and enter
data. If entering a descriptor, or some other data that contains characters as well as numbers,
pressing the buttons multiple times will scroll through the available letters written on the button, in
sequence. E.g. 1, A, B, C
Use this button to access a range of devices. E.g., 2 TO 7.
Press the ENTER button when using the panel, to enter data.
The CANCEL ENTRY button is used to delete data in a current field or return
to the previously displayed menu.
Used to move the cursor back and forth when entering data in a field.
These buttons are used to move between fields when entering data and for
adjusting the LCD contrast when the “Display” button is held on.
Pressing the MENU button will display the main menu on the LCD. Similarly
pressing the FUNCTION button will display the function menu on the LCD.
NORMAL – Normal day to day operation. ENABLED – Access level 2.
Note the key can only be removed in the NORMAL position.