Specifications

Ampac Technologies Pty Ltd
FireFinder
TM
Operators Manual
PAGE 8
DOC No:G0109WO1.doc DIR: L:\MANUALS DATE: 30/11/00 REVISION: 3
6.5 Mounting The Cabinet
The cabinet may be either surface or flush mounted. It should be placed in a clean, dry, vibration-free
area. For flush mount panels a surround is required.
Knockouts are provided for either conduit or cable entry.
Open the front door. Use the keyhole mounting holes in the top corners and in the middle of the unit to
mount it on the wall. Cables to connect the system to its external actuating devices are brought in
through the knockouts on the top or rear of the cabinet.
Fig 1: SP2 & SP4 FireFinder
TM
Mounting Keyhole Details
515mm
Mounting Hole
Cutout Detail
R 3mm
R 6mm
12mm
4 x 25mm
Knockouts
115mm 285mm
110mm
270mm
257.5mm
257.5mm
115mm
40mm