Specifications

Ampac Technologies Pty Ltd

FireFinder

Operators Manual

PAGE 32

DOC No:G0109WO1.doc DIR: L:\MANUALS DATE: 30/11/00 REVISION: 3

7.9 Programming

Fig 28:

The Programming Menu

Press 6 while on the Main Functions menu (if your password gives you access) to display the

Programming Menu.

0. Zone: Enter the zone number and you can change the descriptor (press the numeric keys multiple

times to access characters, use < > keys to move the flashing underline which indicates the cursor

position) You can also change its type. Press << and >> to move between fields. You can also go to

a second screen (by pressing >> to go through all the fields) to show the brigade options:

Alarm:

Bell:

Auxiliary:

Warning:

Sprinkler:

Alarm Led:

Configuration:

You can then go to a third screen showing the “GROUPS”.

After scrolling through the groups you are prompted to press ENTER to confirm your changes.

1. Sensor: Enter the loop and sensor number. You can then edit the Descriptor and type. You can go

to a second screen and allocate the sensor to a zone, and give set the device type. You can then

scroll to yet another screen displaying the brigade options as described above. You can then scroll to

a screen allowing you to set the day/night settings. The next screen is the groups screen.(see below)

After scrolling through the groups you are prompted to press enter to confirm your changes.

2. Input: Allows you to Add, Edit or delete inputs in a panel or on a loop.

3. Output: Allows you to Add, Edit or delete outputs in a panel or on a loop.

4. Groups: A “GROUP” is defined as a collection of actuating devices with a common purpose. In the

FireFinder

we are able to assign a “GROUP” to zones and sensors. This enables programming to

be simplified.

PROGRAMMING MENU

0: ZONE 1: SENSOR 2: INPUT 3: OUTPUT

SELECT No.