Specifications

Ampac Technologies Pty Ltd

FireFinder

Operators Manual

PAGE 27

DOC No:G0109WO1.doc DIR: L:\MANUALS DATE: 30/11/00 REVISION: 3

31. CANCEL - The CANCEL ENTRY key is used to delete any data in the current field or return to the

previously displayed menu.

32. SINGLE ARROW KEYS - These are used to move the cursor back and forth when entering data in a

field.

33. DOUBLE ARROW KEYS - These are used to move between fields when entering data.

34. MENU / FUNCTION - Pressing the MENU key will display the main menu on the LCD. Similarly

pressing the FUNCTION key will display the function menu on the LCD.

35. LCD DISPLAY - This screen can be configured with the servicing companies name and phone

number. It also displays the current date, time and that the system is normal (no faults and alarms).

If there are any faults or alarms the LCD will display the device in question, if multiple detectors or zones

are not in their normal state, the PREVIOUS and NEXT keys are used to scroll through them.

7.2 The Default LCD Display

In its normal state the FireFinder

will display a screen similar to that shown below

Fig 22: The Default LCD Display

This screen can be configured with the servicing company’s name and phone number (via laptop or

modem). It also displays the current date and time and that the system is normal (no faults and alarms)

If there are any faults or alarms the LCD will display the device in question, if multiple detectors or zones

are not in their normal state, the PREVIOUS and NEXT keys are used to scroll through them.

If there is a fault condition or an alarm and the buzzer is sounding, press any key in the FireFighter

Facility to stop it sounding. The FireFighter Facility is the area on the control panel bound by the red

border.

ACKNOWLEDGE

FireFinder 9/9/99 12.00

SERVICED BY YOUR COMPANY

PH: 09 9999 9999

SYSTEM IS NORMAL