Specifications

FIREFINDER NZ CONFIGURATION MANAGER
8 Network Panels
Networked panels are configured in a similar way to an individual panel. In a network each panel is
configured with the hardware that is fitted into that particular cabinet (in the same way a stand –
alone panel is). The main difference is the access levels that are set for each panel.
Figure 78: Networked Panels, DGP’s, Mimics and Controllers
Again click on each controller to set its parameters. The user will configure the modules in each
panel according to what is physically on site. It is normal to configure each panel in order. If this is
not done the modules will be automatically assigned module numbers as they are entered. Once all
of the zone/sensor information is entered, click on each panel and then set the access levels.
Note: Default access is set to global.