Specifications

Page 69

FIREFINDER SERIES II INSTALLATION, COMMISSIONING &

OPERATION

11 Incoming Fire Alarm Signal

 Will operate the red common LED fire indicator

 Will display location of fire alarm origin on the LCD

 Will activate external alarm.

 Will activate the internal FACP buzzer.

 Will activate any ancillary equipment so programmed.

 Will abort any test in progress.

The LCD will always display the first fire alarm signal received in the top section of the LCD. The

lower section of the LCD will also permanently display the most recent zone in alarm. Other essential

fire alarm information and fault or disablement information is available via the

and

keys. After 30 seconds if no key is pressed the top section of the display will revert to

displaying the first zone in alarm.

Figure 80: LCD Screen with 5 Devices in Alarm

Note: The displayed information changes to that associated with the device as the PREVIOUS /

NEXT push buttons are pressed. If there is a fault condition or a fire alarm and the buzzer is

sounding, press the

BUZZER

SILENCE

button to stop it sounding

DETECTOR 1 SMOKE

L1 S1 Z17 ALARM

01/01/2010 16:15:10

SENSOR ALARMS 1 OF 5

******************CURENT ALARM**************************

DETECTOR 5

L1 S5 Z17 ALARM 01/01/2010 16:14:50

AC: 3S ALM: 000 PALM: 000 FLT: 000 DIS: 000